Thermal shock test chambers

DSWDCJ series

For electronic products, components and materials that must withstand rapid temperature change. Samples are switched instantly between high and low temperatures to verify their properties.

Shock temperature range: -60 to +125 °C
Temperature recovery time: ≤ 5 min
Inner volume: 80–1000 L

Request a quote for this model Call 082-908-9598

Imported and supported in Thailand by S.A.G. GLASS · Manufactured by Xiamen Dongshi Testing Equipment Co., Ltd.

Shock temperature

+125 °C -60 °C

The curve is a diagram of the job. The minimum and maximum on the axis come from the model's specs.

Specifications

Item	2-zone chamber	3-zone chamber
Model	DSWDCJ-2-(volume)	DSWDCJ-3-(volume)
Inner volume (L)	80 (50×40×40 cm) · 150 (60×50×50) · 250 (78×63×52) · 500 (70×80×90) · 800 (80×100×100) · 1000 (100×100×100)
Chambers	Pre-heat, pre-cool	Pre-heat, pre-cool, test
Method	Stainless basket moves up/down	Pneumatic dampers switch 3 zones
Temperatures	Shock -60 to +125 °C · pre-heat +50 to +200 °C · pre-cool -78 to +5 °C
Heat / cool time	+20 → +200 °C ≤ 20 min · +20 → -78 °C ≤ 70 min
Recovery time	≤ 5 min (depends on cooling water, temperature span, dwell time and load)
Accuracy	Fluctuation ±1 °C · deviation ≤ ±3 °C
Safety	Overload, over-temp, short circuit, refrigerant high/low pressure, oil shortage, alarm